Star-headlight-lantern 64 Series Staralarms User Manual download pdf

PLIT421 REV. C 12/1/10

64 SERIES BACK-UP ALARMS

64 Series

64G Series

64L Series

1. Mount the alarm in the rear of the vehicle with the sound opening outward towards the hazard

zone.

2. For the plain 64 Series, connect the black wire to the

negative side of the battery or a good chassis ground.

For the 64L Series, connect the top post (shown to the

right) to the negative side of the battery or a good

chassis ground. The 64G series has a self grounding

strap on the right mounting flange. It can be grounded

through the mounting bolt (not included) to the chassis of

the vehicle.

3. For the plain 64 Series, connect the red wire to an independent actuating switch or splice it

into the back-up lights as shown in the diagram below. For the 64L and 64G Series, connect

the bottom post (shown above) to an independent actuating switch or splice it into the back-

up lights. Please Note: The vehicles supply voltage must be the same as the voltage

rating specified on the alarm you are installing. Any other voltage applied will void the

warranty.

ONE YEAR LIMITED WARRANTY

The manufacturer warrants each new product, under normal use, against factory defects in material and workmanship for one year after the date of

purchase. The owner will be responsible for returning to the Service Center any defective item(s) with the transportation costs prepaid. The

manufacturer will, without charge, repair or replace at its option, products, or part(s), which its inspection determines to be defective. Repaired or

replacement item(s) will be returned to the purchaser with transportation costs prepaid from the service point. A copy of the purchaser's receipt

must be returned with the defective item(s) in order to qualify for the warranty coverage.

Exclusions from this warranty include, but are not limited to, bulbs, strobe tubes, domes, and/or the finish. This warranty shall not apply to any light,

which has been altered, such that in the manufacturer's judgment, the performance or reliability has been affected, or if any damage has resulted

from abnormal use or service. This warranty does not apply to defect or damage occurring as a result of disaster, accident, abuse, misuse,

lightning, power surges, or failure to follow instructions in any enclosed manuals. Any damage or defects occurring as a result of any unauthorized

service or repairs by unauthorized persons shall be excluded from this warranty.

There are no warranties expressed or implied (including any warranty of merchantability or fitness), which extend this warranty period. The loss of

use of the product, loss of time, inconvenience, commercial loss or consequential damages, including costs of any labor, are not

covered. The manufacturer reserves the right to change the design of the product without assuming any obligation to modify any product

previously manufactured.

This warranty gives you specific legal rights. You might also have additional rights which may vary from state to state. Some states do not allow

limitations on how long an implied warranty lasts. Some states do not allow the exclusion or limitation of incidental or consequential damages.

Therefore, the above limitation(s) or exclusion(s) may not apply to you.

Model # dB Current

Voltage

Wires

Single Tone 64-087 87 0.3A 12-36 vdc

64-097 97 0.3A 12-36 vdc

64-097-12 97 0.3A 12 vdc

64-102 102 0.3A 12-36 vdc

64-107-12 107 0.7A 12 vdc

64-107-24 107 0.3A 24-36 vdc

Dual Tone 64-097DT 97 0.3A 12-36 vdc

64-102DT 102 0.7A 12 vdc

Auto-Adjusting 64-707A 77-97 0.3A 12-24 vdc

64-802A 82-102 0.3A 12-24 vdc

64-807A 87-107 0.7A 12 vdc

Lugs / No Wires / Grounding Strap

Single Tone 64G-087 87 0.3A 12-36 vdc

64G-097 97 0.3A 12-36 vdc

64G-097-12 97 0.3A 12 vdc

64G-102 102 0.3A 12-36 vdc

64G-107-12 107 0.7A 12 vdc

64G-107-24 107 0.3A 24-36 vdc

Dual Tone 64G-097DT 97 0.3A 12-36 vdc

64G-102DT 102 0.7A 12 vdc

Auto-Adjusting 64G-707A 77-97 0.3A 12-24 vdc

64G-802A 82-102 0.3A 12-24 vdc

64G-807A 87-107 0.7A 12 vdc

Lugs Only / No Wires / No Grounding Strap

Single Tone 64L-097-12 97 0.3A 12 vdc

IMPORTANT: Please read all of the following instructions before installing

your new Star back-up alarm. This instruction sheet applies only for

installation of the models listed above on negative ground vehicles only.

CAUTION: All of our DC powered back-up alarms are polarity sensitive. All wires

connected to the positive terminal of the battery should be fused at the battery

for their rated load. Testing the alarm before this fuse is properly

installed will void the warranty on the alarm.

Black

Red

GOOD

CHASSIS

GROUND

REVERSE

LIGHT

GOOD

CHASSIS

GROUND

Connect the RED wire from the

back-up alarm to the wire that

supplies power to the reverse lights

GOOD

CHASSIS

GROUND

BATTERY

Pre-existing switch in vehicle already connected to

reverse lights (Often activated by gear shifter)

Dual Tone units emit an alternating high/low tone..

Auto-Adjusting units will automatically adjust the output volume

based upon the ambient noise.

64 SERIES BACK-UP ALARMS 1

Summary of Contents

Page 1 - 64 SERIES BACK-UP ALARMS

PLIT421 REV. C 12/1/10 64 SERIES BACK-UP ALARMS 64 Series 64G Series 64L Series 1. Mount the alarm in the re

Comments to this Manuals

No comments

Star-headlight-lantern 64 Series Staralarms User Manual

Browse online or download User Manual for Safety Star-headlight-lantern 64 Series Staralarms. Star Headlight & Lantern 64 Series Staralarms User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Safety Star-headlight-lantern 64 Series Staralarms